Monthly Archives: August 2018
How to extend the PMD shaker screen service life
Pyramid and Pyramid Plus screens provide an easy, cost effective increase in shaker performance. Designed with the latest technology, Pyramid screens allow rigs to screen finer earlier in the drilling process, thus significantly reducing mud and disposal costs.
PMD screen is the corrugated shaker screen with more effective filtration area. It really benefits much on shaker performance during solids control. Some clients comment, the pyramid shaker screen seems shorter life.
Please do remember, when we utilize the PMD screen panel we have to decrease the shaker deck angle. If possible, we kindly suggest combine flat panel and PMD panel together on one shaker. Put the flat ones at solids discharge end. This will help much to save PMD screen life and, achieve higher efficiency than all flat panel fit on shaker.
As with all DC Machinery screens, Pyramid and Pyramid Plus screens comply with API RP-13E standards for effective screen cloth designation.
Oilfield mud tank under manufacturing in DC factory
A mud tank is an open-top container, typically made of steel, to store drilling fluid on a drilling rig. They are also called mud tank mud pits, because they used to be nothing more than pits dug out of the earth.
Mud tanks are the base of solids control equipment. Mud Tanks for solids control system is divided into Square tank and Cone-shaped tank according to the shape of tank bottom.
Now, DC Solid control company are manufacturing 6 sets mud tanks for a India clients. The mud tank surface and the passage are made of the slipping resistant steel plate and linearity netted steel plate which is produced by the professional factory, the mud tanks are made of the side steel pipe, all of the structure can be folded without barrier and pegged reliably.
The mud tanks are used by oil drilling companies as storage for drilling byproducts called mud. The mud tanks do need to be cleaned and they require specialized equipment to do so.
Which industry can be used the hydrocyclone desilters
Hydrocyclone desilter is the third class solids control equipment to treat the drilling fluids. According to the size of the cone diameter, they are divided into Desander and Desilter. Usually the cone diameter is less than 6″is called Desilter, and used as the third-control equipment in drilling operation.
Desilter is composed of 10-12 φ100 or φ125 polyurethane hydraulic cyclone and a small fine shaker combination, mainly used to remove the drilling fluid 20-40μm harmful solid phase. The usage shows that the equipment is designed to be reliable, workable, mud removal effect, is the ideal drilling fluid control equipment.
The desilter is widely used in trenchless HDD, tunneling construction, city bored piling, oil & gas drilling, Drilling Waste Management, Oil Mud Seperation, environment protection, Coal Bed Gas Solids Control System, mining, Oil Sludge Dewatering Systems, Water Drilling etc.
If you have any problems or questions about our products or need our support and assistance, please write to us, we will reply to you within 24 hours. If you become our customer, you will get corresponding discount.
12sets drilling fluid centrifugal pump shipped to Russian
Within the petroleum industry centrifugal pumps are necessary in order to process fluids especially hydrocarbons. To be as a professional solid control system supplier. DC Solid control shipped 12 sets cost-effective centrifugal pump to drilling site.
DC centrifugal pumps (SB sand pumps) are designed and engineered to handle abrasive, viscous and corrosive drilling fluids or industrial slurry. They have been proved and being in operation on land and offshore drilling rigs around the world. Please contact us for more details in order to make you customized.
Applications
Drilling mud mixing and shearing operations,
desander and desilter feed pump
Drilling mud transfer pump
Supercharging, mud cooling towers, wash down.
Chemical, refinery, industrial, construction and agricultural applications.
Contact us if you want to get more infor about it.
DCSLH series jet mud mixer detailed features
Jet mud mixer is a unit combination of centrifugal pump, mud hopper and manifold valve. Jet mud mixer is used to change the fluid or mud density, viscosity by adding and mixing bentonite.
Jet mud mixer(mud mixing hopper) is the equipment to match with the drilling solids control equipment, regularly used to mix and adjust the proportion of drilling fluid, changing the density and viscosity etc. It has a more excellent operation if being matched with shear pump, and also can be designed as double jet mud mixer as the clients’ requirements.\
Detailed of DC Jet Mud Mixer:
1. Material: Iron Q235B from BAOSTEEL with quality certificate
2. Electric components: The well-known brands as Siemens, Schneider or ABB.
3. Motor: Adopt Nanyang or other national famous brand explosion-proof motor
4. Painting: Anti-rust treatment: Galvanizing treatment for the base, hopper and the pipes.
DCSLH series jet mud mixer is matched with other drilling solids control system. It’s safe and reliable, and easy to move. It can enhance dispersion effect of material, improve pressure head of mixed liquid, make the material recycle and mix enough in the mud tank.
China Mud tank agitators suppliers
Drilling mud agitator is a device mounted on mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties of drilling mud that will pump back to the borehole.
DC Solid control mud Agitator Available in 5 -15 horsepower, our extreme-duty mud agitators feature the rugged and reliable gear box for long-lasting performance. Along with the gearbox, all our Mud Agitators include an explosion proof motor, impeller and shaft assembly.
Solids control mud agitators are the mud mixers on Mud Tank. Including the horizontal and vertical type. That is meant by motor mounting direction. Nowadays, more and more users prefer the helical bevel geared agitator. Why? The helical bevel gear box will be more stable and reliable than the helical worm and wheel gearbox.
DC manufacture mud agitator with worm and wheel gearbox, also the agitator with helical bevel gear box. The high performance, efficiency, and quality is appreciated much among clients.
Desanding Slurry treatment system from DC solid control
Desanding Slurry treatment system is a desander which is a piece of drilling rig equipment designed to separate sand from the drilling fluid. Abrasive solids which can not be removed by shakers can be removed by it. The desander is installed before but after shakers and degasser. We are a desander manufacturer and supplier in China.
Features:
1.High mud handling capacity, sand can be removed efficiently.
2.The polyurethane screen has many advantages such as easy operation, low trouble rate, convenient installation and maintenance
3.The adjustable vibrating force, angle and mesh size of the vibrating screen enable the equipment possess a high screening efficiency.
4.Energy saving efficiency is significant since the power consumption of the vibrating motor is low.
6.The abrasion and corrosion resisting feeding pump has advantages such as advanced centrifugal designing, optimal structure, stable operation and convenient maintenance.
7.The hydraulic cyclone with advanced structural technology can efficiently separate sand from slurry. Moreover, it features in light weight, corrosion and abrasion resisting material, so it can work stably in the worst condition without maintenance.
DC Solids Control also provides customized mud systems based on customers’ special demands. If you have some particular work need to do, please feel free to connect
us
The SB series centrifugal pump for solid control system
SB series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipment work efficiently.
SB Series Centrifugal pump is used for transferring slurry or mud or water. It can be used as feeding pump for desander, desilter, or used as mixing pump for Jet Mud Mixer. Also it can be used as trip pump, and supercharging pump for rig mud pump.
All DC model centrifugal pump use tungsten carbide mechanical seal, with famous brand Bearing. And spare parts interchangeable with most of the international Brand pump which helps customer to source spare parts easily. Open impeller design that lowers axial thrust loads, and make it easier for installation, repair and maintenance.
DC Centrifugal pump has been exported to many overseas countries. The reliable quality and cost effective solutions has helped GN Solids Control to win many orders of centrifugal pump from the world. With our branches and partners around the world.
Various mud tanks from DC solid control
DC solids control designs and manufactures various types of tank including mud tank, water tank, oil tank, etc. DC solid control mud tanks are usually used to install solids control equipment, storage mud, mixing mud, etc.
Each mud tank is provided with clean out gates with butterfly valve. Walkways and tank top covered with serrated galvanized bar grating or checkered plate. Fixed ladder to be provide for accessing the top of the mud tank.
DC Solids Control manufacture varies of mud tank/water tank,oil sludge tanks,Oilfield three runner design Skid mounted tank,with galvanized grating, safe handrail,coated with Marine corrosion-resistant zinc rich epoxy coating and paining,two layers for inside tank,three layers for outside tank.
DC Solids control manufacture mud tank for our own fluids processing system but also we supply mud tank with customized desgin.We are located in China iron production City-Tangshan. If you want to purchase mud tanks, please feel free to contact us.
400GPM mud system package from DC Machinery
The drilling mud cleaning system are required in oil well drilling,horizontal drilling,the mud cleaning system fuction is for preparing clean mud for drilling rig. The mud system is engineer designed to clean, recycle and mixing drilling mud in one mud tank package.
DC400GPM mud system Packaged Mud Recycling System comes standard with a dual-deck 4-panel linear motion shaker. Featuring (6) 4” hydrocyclones capable of providing 400 gpm of processing capacity. Hydrocyclone discharge flow dividers, a personal restraint and deck access package, three dedicated centrifugal pumps, and a triple- axel trailer with a mechanical 4-point jacking system make this the perfect system for rigs smaller than 100,000-pound push/pull capacities.
Its small footprint and quiet operation make it useful in urban and suburban locations. It is also designed to offer durability in regular off-road use, towed behind heavy equipment.
Please contact DC Machinery if you want other capacity mud system for your drill rigs.