DC Solids Control provides a large number of solid control system and waste treatment system products to customers worldwide every year.

DC Solids Control desander is mainly used to remove drilling cuttings larger than 55 microns in drilling fluid. The drilling fluid purification sand remover is mainly composed of underflow screen and 10 inch sand removing cyclone. Under normal circumstances, the centrifugal pump is used to feed the desander.

The cyclone uses a centrifugal pump to pump the mud into the swirl cone at high speed, and centrifugally separates the mud under the action of centrifugal force. After centrifugal separation, the lighter mud flows out of the cyclone outlet. The mud with high solid phase is ejected through the drip nozzle, and further sieved and separated through the underflow screen.

The structural principles of DC Solids Control Desilter and Desander are similar. The only difference is that the cyclone used in the desilter is a 4-inch cyclone. Generally, the number of desilting cyclones is an even number. Desilter is mainly used to remove solid cuttings larger than 25 microns in drilling fluid.

Besides above the separated desander and desilter. DC Solids Control also provides ‘3 in 1’ treating unit which is ‘DC Mud Cleaner’, it’s composed by 10 inch cyclone, 4 inch cyclone and bottom shale shaker. Every year. Welcome to connect with us if you need any solids control equipment.