Submersible slurry pump normally used for feeding shale shaker for CBM, HDD. It also can be used as feeding pump for decanter centrifuge. Usually we use single stage and single suction system. The standard length of pump 1 3m, but it can be customized per user demand.

DC Solid control shipped 25 sets submersible slurry pump to Singapore market recent days. Actually, the slurry pump is one kind of centrifugal pump. As slurry pump is mainly transferring liquid and solid mixture, the pump raw material is rather anti-abrasive. It can transfer different hard materials. Including sand, cement, particles, shale, and so on.

Submersible Slurry Pump Features & Benefits
1. The pump shaft under the liquid has enough rigidity. No bearing is set between impeller and pump.
2. Shaft seal is not adapted, the medium with dense solids can also be transported.
3. The Deep Well Water Pump may penetrate the liquid between 800m-2500mm under it, and may be equipped with suction pipes if necessary.
4. Vertical motor is installed on the motor base, connected to the vertical slurry pump by coupling.

Since these submersible slurry pump will be used in Singapore, client has strict requirement to satisfy some standards, especially for our electric motor. We provide CE certification and explosion-proof proof as per their requirement. The model they ordered is our commonly 100YZ100-30 submersible pump with power 22kw. Its lift is 17.5 meter, and rotary speed is 1440r.min. Flow rate is 110m3/h. The length of our pump can be customized according to client’s needs.