Category Archives: mud agitator
China DC drilling mud agitator Factory
Drilling fluid mud agitator is mainly keep uniformity of drilling fluid and made solid phase suspension, is the ongoing and reliability drilling mud solid control system. it is mainly used to mixed drilling fluid, in order to prevent drilling fluid solid phase particles precipitate in the tank type circulating system, make the performance of drilling fluid stabilize and mixing uniformity.
The characteristics of drill mud agitator
1 Drilling mud agitator use the arc and cylinder reducer, the section is cylindrical turbine of circular arc , the tooth profile of turbine is round which is conjugate with worm.
2 Drilling mud agitator use the combination of reducer and explosion proof electric machine, it is easy to maintain, it adapts to the condition of field bad working environment.
3 The stirring intension of drilling mud agitator is strong, extensively affected and decrease the starting resistance.
4 The motor of drilling mud agitator place in a horizontal position, it is convenient to install and adjust.
The structure and working theory of drilling mud agitator
Structure: the device is mainly made of explosion proof electric machine, reducer, engine base and impeller components, reducer and motor, reducer and wave wheel are all connected with solid coupling. The wave is made of four impellers weld.
Working theory: The wave can make agitate fluid produce vortex motion and enhance the mixing effect. The tray caught in the middle of the blade can avoid the mud solid phase deposit on the round of lower impellers after stopping, such use can reduce the resistance moment of the sediment to impeller, it prevent burn motor when starting overload.
If you have requirements with different model mud agitators please contact DC solid control office.
JBQ series mud Agitator advantages and shortcomings
JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.
The advantages of mud agitators
1All kinds of the gear boxes and the combination of the impellers can adopt t most requirements.
2It is efficiency in the deep and big containers
3It can design the appropriate shearing force according to the requirements.
4It expose more liquid which touching the atmosphere, help cooling drilling fluid.
The shortcoming
1The drilling fluid in the different containers can’t be blended, the drilling fluid can’t be shifted.
2In most cases need power supply.
3It is maybe exist dead zone.
4It is need installed partitions
DC is a professional manufacturer of solid control system/equipment in china. We will provide our client high quality products with most reasonable price, at the same time we also sincerely offer the high level after sales service for any home or abroad clients. We still adhere to the concept of Creating the maximum values and the satisfaction for our clients.
A container of JBQ15 Mud agitator shipped to Pakistan
DC Solid control shipped 22 sets of JBQ15 Mud agitatot to Pakistan client last week. The end user is repeat client of our company from 2014. And this is the fifth order of JBQ15 Mud agitators.
Mud Agitator is also called Mud Tank Agitator and widely used in the mud solids control system. It is installated in slurry storage tanks or mud tank and to prevent drilling fluid solid Particles deposited in the mud tank. DC Solid control is the famous and professional Mud Agitator Manufacturer and can produce the horizontal Mud Agitator and vertical Mud agitator.
Usually Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission 、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for DC Solids Control drilling fluids processing system.
DC Solids Control as a professional manufacturer for soilds control equipments, we have designed lots of high-quality products, and JBQ series Agitator is one of them.
DC Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce. Buy drilling fluid mud agitatorfrom China manufacturer.Your best mud agitator for drilling mud circulation system.
Another 4 sets of JBQ5.5 Mud Agitator Shipped To UAE
Drilling mud agitator is a device mounted on mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties of drilling mud that will pump back to the borehole.
Yesterday, DC Solid control got a supplemental order of 4 sets of JBQ5.5 mud agitators shipped to UAE. The oilfield mud tank agitator is configured with an explosion- proof motor, reduction gearbox, impeller, and shaft with assembly bushings. Canted blade impeller are commonly used. Horsepower, mechanical configuration, impeller diameter, number of impeller and shaft length are customized to tank dimensions and maximum mud weights. Here is a list of our recommended configuration.
Agitators Features
Helical-bevel gearbox
5-30 HP available
Sized to process 20 ppg drilling fluid
By unitizing the motor and gearbox, weight and space requirements are reduced.
Customized configuration is available
Our factory approval the ISO9001,drilling agitator certification. DC solids control is the designed,selling,production,service and delivery of Chinese mud agitator manufacturer. We will provide the high quality drilling fluids agitator and best service.Your best drilling mud tank agitators start from DC solids control.
Bulk stock of DCJBQ Mud Agitator From DC Solid Control
Drilling mud agitator is a device mounted on mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties of drilling mud that will pump back to the borehole.
DC Manufactured bulk stock JBQ5.5, JBQ7.5, JBQ11 and JBQ15 Mud agitators for clients urgently requirements. The oilfield mud tank agitator is configured with an explosion-proof motor, reduction gearbox, impeller, and shaft with assembly bushings. Canted blade impeller are commonly used. Horsepower, mechanical configuration, impeller diameter, number of impeller and shaft length are customized to tank dimensions and maximum mud weights. Here is a list of our recommended configuration.
DCJBQAgitators Features
Helical-bevel gearbox
5-30 HP available
Sized to process 20 ppg drilling fluid
By unitizing the motor and gearbox, weight and space requirements are reduced.
Customized configuration is available
DC Solid control approval the ISO9001. DC solids control is the designed,selling,production,service and delivery of Chinese mud agitator manufacturer. We will provide the high quality drilling fluids agitator and best service.Your best drilling mud tank agitators start from DC solids control.
Horizontal Mud Agitatot Produced By DC Machinery
Mud agitator is used in the surface mud system to suspend solids and maintain a homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor coupled to a gearbox that drives the impeller & shaft. The impellers transform mechanical power into fluid circulation or agitation. The objective is to achieve a uniform suspension of all solids.
DC produce agitator with worm and wheel gearbox, also the mud agitator with helical bevel gear box. The high performance, efficiency, and quality is appreciated much among clients. Helical bevel geared agitator will transfer more efficient to shaft save more energy than common worm and wheel gearbox. No matter for horizontal or vertical agitator, there is helical bevel gearbox available.
This mud agitator from DC Solid control has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、 JBQ7.5kW 、JBQ11kW and JBQ15kW. The drilling mud agitator is an important components for DC Solids Control drilling fluids processing system.
Please contact DC Machinery to inquiry the mud agitator if you have interest with it.
16pcs 7.5Kw Mud agitator shipped to Inida
Drilling mud agitator,Supply drilling mud tank agitators for solids control system, DC drilling fluids agitator for mud system reliable quality,competitive price. Last week DC Solid control shipped 16 pcs Mud agitator to India drilling mud recycling site.
The model of mud agitator is 7.5kw request double impeller and 3 m shaft lengtg. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.
Mud agitator is an important part of the drilling-fluid solids controling system. Drilling fluids agitator can be installed on drilling fluid tank, with the impeller submerged into certain depth under fluid surface to stir the fluid directly. During this process, the drilling fluid can be mixed even, and the solid particles are eliminated. In this way, it can improve solid phase dispersion, and increase the viscosity and gel strength, thus to make drilling fluid keep accordant with the requirement, provide needful fluid for drilling process, and ensure the smooth going of drilling work.Drilling mud agitator is the same as mud agitator.
DC solid control provide vertical and horizontal mud agitator. Horizontal mud agitator is divided into coupling type and direct type agitator. If you need a horizontal mud agitator, we recommend you use a direct type agitator. drilling mud Agitator is an ideal device for stirring, mixing liquid and preventing the solid-phase precipitation in the mixture.
Advantages of mud agitator from China solid control factory
Mud agitator, also called drilling mud agitator, used for drilling fluid agitation mix, prevent drilling fluid solid particles in the tank circulation system deposit, cycle
drilling fluid performance stability, mixed evenly. DC mud agitator has high efficiency and wide usage, compact structure, big intensity stirring, easy maintenance and other
significant advantages.
DC solid control provide vertical and horizontal agitator. Horizontal mud agitator is divided into coupling type and direct type agitator. If you need a horizontal mud
agitator, we recommend you use a direct type agitator. drilling mud Agitator is an ideal device for stirring, mixing liquid and preventing the solid-phase precipitation in the
mixture.
Advantages of Drilling Mud agitator
The gearbox adopted worm and gear. Better scuffing more reliable.
Motor and gear box will be connected by coupling or directly. Agitation speed is more stable.
Good heat exchange performance faster cooling down.
Lower decibels.
Shaft and blades are customizable.
Durable enough, easy to install, operate ,and maintain.
Can be used under variety condition.
DC solid control is an exporter of centrifugal pump . We are an exporter of drilling fluids mud agitator.Our factory approval the ISO9001,drilling agitator have the API
certification. DC solids control is the designed,selling,production,service and delivery of Chinese mud agitator manufacturer. We will provide the high quality drilling fluids
agitator and best service.Your best drilling mud tank agitators start from DC solids control.
JBQ Mud agitator designed byChina DC good reputation manufacturer
A mud agitator is used in surface mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor, coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation. The objective is to obtain a uniform suspension of all solids.
Usually JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW. The drilling mud agitator is an important components for DC Solids Control drilling fluids processing system.
Features of DCJBQ Mud agitator
Famous brand motor and gearbox.
FAG, SKF or other top brand bearing.
SOG oil seal.
Helical-bevel gearbox
Sized to process 20 ppg drilling fluid
Explosion-proof electric motor
By unitizing the motor and gearbox, weight and space requirements are reduced
Compact and small footprint
Customized configuration is available
Please contact DC office to get more information about the mud agitators
Drilling Mud Tank System Agitator China Manufacturer
Mud Agitator is also called Mud Tank Agitator and widely used in the mud solids control system. It is installated in slurry storage tanks or mud tank and to prevent drilling fluid solid Particles deposited in the mud tank.
Mud Agitators mix and agitate the drilling mud that is used to prevent solid particles from depositing in the circular tank. This is also used to stabilize the work of drilling fluid. The Impeller shaft present in the mechanical Agitator transforms mechanical power into fluid circulation. The Mud Agitator can be obtained from the Mud Agitator Manufacturer in China and are generally available in horsepower such as 5HP, 7.5HP, 10HP, 15HP, 20HP, 25HP and 30HP.
DC Solid control mud agitator features a “C” face motor couple to a rugged oilfield gearbox, which eliminates misalignment and troublesome couplings. This configuration promotes long motor and gearbox bearing life. Please contact with DC representative with your tank dimension and your detail requirement. We will recommend the right model with specification about the horsepower, impeller (size, type& quality), and shaft length etc to meet your requirement.
If you want to buy Mud agitators, please contact DC Solid control office to get more information about it.