Category Archives: Solids control equipment
DC Factory provide you professional solid control
The performance and quality of drilling fluid solid control equipment is the key of solid phase control technology. Drilling fluid solid phase control system is mainly including drilling fluid circulating tank, drilling fluid purification treatment equipment and elector control equipment the three parts. But the drilling fluid treatment equipment is made of shale shaker, desander, deserter, degassing, centrifuge, centrifugal pump and agitator. Aiming at environmental protection district all can allocate drilling cutting recovery and waster fluid treatment device.
Now, solid control equipment is mainly develop desander, deserter and degasser which the occupy area is small, the efficiency is high and long service life and integration with high speed centrifuge realize automatic detection and according the result to control.
In recently years, the theory research and manufacturing technology process of solid phase control equipment all have a big progress, especially in aspect of theory research, such as the working principle of shale shaker and hydrocyclone all have reached or approached the word advanced level. But the performance and service life of domestic solid control equipment have a certain distance with foreign equipment, mainly the quality of material, processing technic, processing accuracy and universal equipment.
DC Solid control to be a professional factory can supply you before sale, after sale service. If you want to purchase solid control equipment, please contact DC Solid control office to get more info.
Complete solid control system from China top Manufacturer
There’s no doubt that drilling fluids (or mud) play a crucial role in drilling activity and efficiencies today – cooling and lubricating drill bits, carrying drill cuttings to the surface, controlling pressure at the bottom of the well, and ensuring that the formation retains the properties defined for that well.
Oil Drilling Mud System is the a multi-tank mud system, it is also called solids control system, or mud circulation system for the oil gas drilling rigs. DC oil drilling mud system is available for different oil drilling rig sizes from 250HP to 3000 HP with different capacity.
The solids control configuration reduces the need for chemical additions to fluids and minimizes rates of dilution typically used when solids removal efficiency has not been optimized.
Oil drilling mud system including following solids control equipment:
1) Shale Shaker for primary solids control 100 microns.
2) Desander for second phase solids control of cuttings 40 microns.
3) Desilter for third phase solids control of cuttings 20 microns.
4) Decanter Centrifuge for the 2-7 microns fine solids separation.
As the leading manufacturer for oil gas drilling mud system, DC Solids Control products is certified by ISO, Europe CE, and Russia TP and TC. The explosion proof standard can be IEC Ex, or ATEX certified for developed countries for Zone 1 and Zone II application. If you have any request please contact us freely.
Solid control equipment combination and function
As part of its consolidation as a fluids management company, DC Solid control expanded into Solids Control Services for many than 10 years. Solids control equipment include Shale shakers, Hi-G driers and centrifuges/decanters.
Solid control equipment is used in drilling rig to separate the solids in the drilling fluids that are crushed by the drill bits and carried out of the well surface. Solid Control Equipment is also called drilling mud cleaning equipment, which used for control the solids by mechanical separation method to keep the balance of drilling mud.
Solids control equipment including:
The first phase primary solids control using the drilling fluids shale shakers to separation drilling solids upper of 100 microns.
The second phase solids control equipment is called hydrocylone desanders for sepration of drilling solids upper of 40 microns, which is made from one number 10 inch desander cones for 500GPM solids control system, two number of 10 inch desander cones for 1000 GPM solids control system, and 3 desander cones for 1500 GPM.
The thrid phase solids control equipment is the hydrocyclone desilters for drilling cuttings upper 20 microns, which is a number of 4 inch desilter cones, for different capacity of solids control system from 500 GPM to 1500 GPM.
DC Solid control provide professional technical supporting. If you have requirements of solid control equipment, please feel free to contact us.
500GPM Solid control system for waterwell drilling project
China top supplier DC Solid control can provide a wide variety of linear and balanced elliptical motion shakers, mud cleaners, desanders, desilters, and centrifuges, each of which can be tailored to your requirements, from recycling to dewatering drilling fluids.
Now, our company are manufacturing a set of 500GPM solid control system for Egypt waterwell drilling project. DC Solids Control 500gpm mud system is functioning well there with Clients’ trailer. The client design along with fabricate the trailer in your area, meanwhile, we design the proper size mud system and also mount it on the trailer home.
The mud system is by using two main equipment, shale shaker & mud cleaner . Each equipment is with dealing with capacity 500gpm.
Shale shaker DCS700-3 is with 3 panel shaker screen to remove the top solids up to 100microns.
Mud cleaner DCQJ200X1/100X8 with 1 set deck shaker as well as 8 each desilter cones to remove the solids approximately 30-50microns.
DC Solid control specialists also provide, for sale or rent, unitized recycling systems capable of cleaning drilling fluids at a rate of 150GPM to 1,000GPM (568l/min to 3,785l/min). In addition, we manufacture shaker screens that are compatible with every brand of solids-control equipment in the industry.
Function of drilling fluid and drilling fluid equipment
The drilling fluid circulating system is like a close loop electric circuit through which drilling fluid (i.e. mud) can travel from surface to all the way down hole and back to its initial point.
The main component of the drilling fluid circulation system include shale shaker, desander, desilter, vacuum degasser, decanter centrifuge, mud tank, agitator, centrifugal pump. mud hoppers and ect. The drilling fluid circulation system also called solid control equipment or solid control system.
The function of the Drilling fluid and equipment maintenance cost can decrease greatly when proper solids control practices are utilized. From a fluid control stand point it would be desirable in most cases to remove all drilled solids. Although this is possible, it would be cost prohibitive.
The goal of a solids control system is to achieve the balance between mechanical solids separation and dilution that will result in drill solids being maintained at an acceptable level with a minimum of cost.
3 Sets ZJ40 mud system shipped to Russian
DC Machinery is a specialist provider of separation and filtration services to various markets ranging from the Oil & Gas and Petrochemical Industries to the provision of services to agricultural industries. DC Machinery is proud to offer an unrivalled fleet of decanter centrifuges to client requirements.
Yesterday, DC Machinery shipped 3Sets ZJ40 mud system for Russian clients. The mud system mainly include 6 sets shale shakers, 3 sets mud cleaners, 3 sets decanter centrifuges, 3 sets vacuum degasser, mud agitator and centrifugal pumps.
Solid control equipment is used in drilling rig to separate the solids in the drilling fluid that are crushed by the drill bits and carried out of the well surface. Normally solids control system is consist of mud tank, shale shaker, vacuum degasser , desander, desilter, centrifuge ect.
DC Machinery strive to provide to its clients quality solid control equipment which provides better performance with minimum error.
DC Compact mud system shipped abroad used for bored pile
As a China mud treating system provider, DC Solids Control manufactures various standard mud systems and customized mud systems to meet customers’ demands. DC mud systems now have been largely used in oil and gas drilling, HDD, Trenchless, Bored Pile Drilling, TBM, CBM etc.
Recent days, DC Solid control shipped 3 sets mud system to Turkey market for the Bored Pile fields. DC compact mud system just has one treating desander or desilter mounted on the top of a small mud tank. It’s equipped with one centrifugal pump to feed the mud into those cyclones. And the bottom shaker is used to separate out finer solids.
DC Solids Control is one of the most famous mud treating system manufacturer that come from overseas. At first DC Solids Control met severe competitiveness in turkey, but DC Solids Control final won customers with the excellent cost effective feature.
DC professional is always devoted to provide the best quality products for customers. Welcome to your inquiry of any type mud system to DC solid control, there you will getting more chance for your project.
Congratulations to DC solid control new website is on line
DC Solid control company is a professional manufacturer of drilling mud equipment. The main product of ours is shale shaker, desander, desilter, vacuum degasser, mud agitator, centrifugal pump and ect.
In order to extend our sales volume. DC solid control build a new website to show more about us to foreign clients. This is our new website URL. http://www.dcsolidscontrol.com/contact-us/
Hope can get your notice, I will updating more things in the web.
Meanwhile, is you have some interests with our product, please directly contact me. There you will getting more discount.
Wide range solid control system China supplier
Removing detrimental drilled solids from the mud system is one of the most important phases of the well delivery process.
Failure to properly control solids can increase the mud density above its desired weight, contributing to detrimental effects on many areas of the drilling process.
We provide a range of solids control systems that allow the viscosity and density of drilling mud to be precisely maintained; increasing the drilling penetration rate; extending the life of drill bits and pump parts and reducing overall operational costs.
Our solids control units separate solids from drilling mud by utilizing accelerated g-force and/or screen separation and are equipped with centrifuges, mud shakers and tanks for storing and processing mud.
The double deck desilter unit used for drilling water site
The double deck shaker is usually a dual-function unit which can be used both as shale shaker and mud cleaner, the bottom shaker is taken as shale shaker to separate big solids, the best shaker is acted as desilter flow shaker. The double deck shaker with desilter is widely applied for the well drilling field.
Double deck shaker with “desilter cone and founfation small tank
Fluids will firstly be pumped onto the bottom shaker, the shaker screen is small API number to separate the lar123ge particle from the fluid. Secondly, DC high effective centrifuge pump will transfer the fluid to desilter cone for second step process.
The top deck will handle the fluids from apex of de sander cone.. But the feeding type is very simple way in which can save the working space. Higher mesh shaker screen is applied on the shaker than de sander shaker. It is effective for the 250GMP and 350GPM capacity.
Besides abobve, the small unit includes a tank which is a base of the desilter and mixing material. To be as a professional manufacturer of mud equipment. DC Machiney can design all types mud system unit used for different areas, such as, oil& gas drilling, HDD, CBM, pilling project and ect.