replica rolex Umbrella coverage to prolong your liability. fake watches fake watches Some actions you'll be able to choose to save lots of with your 2nd household insurance policy. Set up an alarm technique, in the event you can, also get 1 that detects fireplace or strength failure. Set up a fence. Trying to keep factors away from the property while in the very first area is usually an excellent protection. Is your property in the gated group replica breitling replica breitling ? replica cartier replica cartier replica cartier watches replica cartier watches This can be excellent for an insurance policy lower price. Would be the 2nd residence a condominium? Condos have their particular distinctive issues replica watch replica watch . One example is the affiliation typically carries insurance policy to deal with the constructing but most periods won't protect your contents. Holiday properties are only that, family vacation properties, meaning that for a long time for the duration of the entire year replica rolexfake omega

Tag Archives: drilling fluid cleaners

Mud cleaners used for solid control system

DCQJ mud cleaner is consisted of shale shaker,desander and desilter for oil&gas well drilling fluids treatment system. More importantly,mud cleaner works more effectively,especially in cleaning functions compared with separated desander and desilter.Sometimes,it can be used as a shale shaker.

The mud cleaner is designed to remove the drill cuttings while allowing the weighted fillers of the mud, commonly barite, to stay suspended in the mud. The cuttings, consisting of solids greater than 74 to 105 micrometers, are filtered out in the staged process of the mud cleaner.

Mud cleaner

The first-pass solids control devices of the mud cleaner are the hydrocyclones which are mounted over the vibrating screen of the shale shaker. Several hydrocyclones are used to increase the flow rate of the mud. There is also a combination of varying sized hydrocyclones. Smaller cones, typically 4″ in diameter known as desilters, remove finer silt sized solids, while the larger cones typically 10″ in diameter known as desanders removed the coarser sand sized particles.

Mud cleaners

According to the customers’requirements, our company can design the mud cleaner which can meet almost all needs. Our factory and company are Quality Management System ISO 9001-2000 certified. DC Solids Control operate waste mud management international sales,service,manufacturing,distribution serivce.Buy dilling mud cleaners from China manufacturer,good quality,best price.your best choice of dilling mud cleaner

 

The mud cleaner is designed to remove the drill cuttings

Mud cleaner is consisted of shale shaker,desander and desilter for oil&gas well drilling fluids treatment system. More importantly,mud cleaner works more effectively,especially in cleaning functions compared with separated desander and desilter.Sometimes,it can be used as a shale shaker.

cleaners

Mud cleaners are used to remove drill cuttings from drilling fluid, known as mud. The mud is a non-Newtonian fluid of variable viscosity that serves several purposes in drilling operations. Mud is used to drive the down-hole motor, cool the drilling bit, carry the drill cutting to the surface for disposal, and maintain hydrostatic balance in the well.

mud cleaner

The mud cleaner is designed to remove the drill cuttings while allowing the weighted fillers of the mud, commonly barite, to stay suspended in the mud. The cuttings, consisting of solids greater than 74 to 105 micrometers, are filtered out in the staged process of the mud cleaner.

According to the customers’requirements, DC SOLID CONTROL company can design the mud cleaner which can meet almost all needs.

Development of mud cleaners of mud circulation system

Mud cleaner is the second stage equipment of drilling fluid circulation system. Mud cleaner is the combination of desander, desiter cones and and very fine mesh vibrating screens (120-400 mesh) to remove fine drilled solids while returning valuable mud additives and liquids back to the active mud system.

DSC00245

Mud cleaners were developed in the early 1970s to remove fine drilled solids from weighted mud without excessive loss of barite and fluid. They have also proved valuable tools in closed systems and other dry location applications.

DSC00247

Traditional mud cleaners use multiple 4 or 5 cyclones, mounted over a vibrating screen, and are able to effectively process 400-600 GPM. The process capacity is limited by screen capacity and its ability to discard dry solids.

With the introduction of linear motion vibrating screens, the capacity of the mud cleaner screen has been greatly increased. This, in turn, allows the use of additional hydrocyclones and higher, overall process capabilities. Please contact me to get more info about the mud cleaners

Mud cleaners in stock and enjoy discount sales

Mud cleaner is the second stage solid control equipment of drilling fluid circulation system. It is an obbligato equipment in drilling site. Drilling mud cleaners and are available in different configurations to meet customer requirements. 2-panel, 3-panel or 4-panel shakers are available with desanders and and/or high-volume desilters.

cleaners

To meet users urgently requirements, DC Solid control company manufactured many model and types mud cleaners in stock and enjoy a big discount. Traditional mud cleaners use multiple 4? or 5cyclones, mounted over a vibrating screen, and are able to effectively process 400-600 GPM.

mud cleaners

The process capacity is limited by screen capacity and its ability to discard dry solids. With the introduction of linear motion vibrating screens, the capacity of the mud cleaner screen has been greatly increased. This, in turn, allows the use of additional hydrocyclones and higher, overall process capabilities.

Now, DC Solid control can design any capacities mud cleaners according to users special requirements. Usually the desilter we use 4″ and 5″ hyfdrocyclones, desander use 8 “, 10″ and 12″ hydrocyclones. Different desander and desilter cones combination will have different treating capacity. If you want know more it, please contact DC solid control office.

 

DCQJ Series oilfield mud cleaner shipped to abroad

DCQJ mud cleaners and are available in different configurations to meet customer requirements. 2-panel, 3-panel or 4-panel shakers are available with desanders and and/or high-volume desilters. Our new hydrocyclones technology replaces the conventional desanders and desilters cones with significant benefits.

solid control system1

Yestersay, DC Solid control company shipped 3 set mud cleaner to the abroad clients used for oilfield. This model Mud Cleaner combines 10” desander hydrocyclone(s) with smaller 4” hydrocyclones, effectively taking two “cuts”at the unwanted solids contaminating the fluid. The 10” remove large solids down to approximately 100 microns and the 4” can remove solids down to the 20 micron size range.

The vibratory screening unit is designed to take the underflow of both size sets of hydrocylones and separate the concentrated solids from the liquid. The Mud Cleaner requires two pumps to operate, with the pump feeding the 10” cyclones typically taking a suction from a compartment upstream from the compartment fromwhich the other pump takes its suction to feed the 4” hydrocyclones.

The Mud Cleaner will be designed to handle the entire circulating volume of whichever system in which it is operating. Mud Cleaners are effective on both weighted and un-weighted drilling-fluid systems in removing and drying solids while retaining the expensive liquid phase. Used correctly, the Mud Cleaner can lower both drilling fluid and disposal costs.

Working structure of solid control equipment in drilling fluid system

Mud Cleaner is designed to handle a high flow rate of fluid through the hydrocyclones which separateout fine solids into a concentrated underflow that is then distributed onto the vibratory screening deck.

This combination of hydrocyclones and screening energy allow for treatment of a much higher flow rate of fluid than a vibratory screening unit can handle by itself. This small compact unit is a powerful tool in removing small solids from a high flow rate stream, while producing relatively dry solids that report off of the screening unit.

Mud cleaner

This model Mud Cleaner combines 10” desander hydrocyclone(s) with smaller 4” hydrocyclones, effectively taking two “cuts”at the unwanted solids contaminating the fluid. The 10” remove large solids down to approximately 100 microns and the 4” can remove solids down to the 20 micron size range.

Mud cleaner1

The vibratory screening unit is designed to take the underflow of both size sets of hydrocylones and separate the concentrated solids from the liquid. The Mud Cleaner requires two pumps to operate, with the pump feeding the 10” cyclones typically taking a suction from a compartment upstream from the compartment fromwhich the other pump takes its suction to feed the 4” hydrocyclones.

The Mud Cleaner will be designed to handle the entire circulating volume of whichever system in which it is operating. Mud Cleaners are effective on both weighted and un-weighted drilling-fluid systems in removing and drying solids while retaining the expensive liquid phase. Used correctly, the Mud Cleaner can lower both drilling fluid and disposal costs.

Mud cleaner group used in Mico-tunneling fields

Micro-tunneling—Micro-tunneling has become very popular in Europe and is being used more frequently in the United States. Micro tunneling is the horizontal boring of a large-diameter hole (from 27 inches up to 10 feet) while simultaneously laying pipe.

mud cleaner

Typically, this technique is used in cities when laying or replacing water and sewer pipe beneath buildings and heavily traveled roads.

mud cleaners

To prepare for these operations, large-diameter, vertical holes, or “caissons,” are excavated allowing the drilling equipment and hydraulic rams to be set up at the desired depth. The caisson is excavated slightly below the equipment level creating a sump for the returned drilling fluid and associated drilled solids.

The returns are pumped to the surface by a submersible pump to a compact solids removal system, which typically consists of a shale shaker and mud cleaner mounted over a small tank.

 

Using Importance Of Mud cleaners For Unweighted Drilling Fluids

The purpose of the mud cleaner is to remove drilled solids larger than barite. Mud cleaner could be useful cleaning facility at many filed of mud management.

The principal use of mud cleaners has always been the removal of drilled solids larger than barite. Sufficient drilling fluid bypasses shale shakers so that even with 74-micron (API 200) screens on the shakers, many drilled solids are removed from a weighted drilling fluid.

mud cleaner

Using of mud cleaners is the removal of drilled solids from unweighted drilling fluids with a very expensive liquid phase—such as the initial application with the potassium chloride drilling fluid.

In this case, the underflow from desilters is screened to remove solids larger than the screen opening. Solids and liquids pass through the screen and remain in the system. This is beneficial for nonaqueous drilling fluids as well as saline water–base drilling fluids.

What is the definition and function of mud cleaners

A Mud Cleaner is a desilter unit that is used to remove sand particles which have a grain size of 20 microns or less. This is a hydroclone that operates on the basis of centrifugal force such that the mud with smaller particles is returned to the active system while the larger particles are discarded.

The primary function of a mud cleaner is to remove sand and silt from drilling fluids in the drilling rigs. The usual size of a desilter is 6 inches and above, however, the most common size is 10 inches.

cleaners

Mud cleaners are used mainly with oil- and synthetic-base mud where the liquid discharge from the cone cannot be discharged, either for environmental or economic reasons. Desilters as well as desanders are considered to be mud cleaners which are similar to each other with the only difference in the size of mud particles that are removed by the two devices.

mud cleaner

Desilters remove mud particle sizes which are 20 microns or lesser whereas desanders remove mud particle sizes from 50 to 70 microns. The installation position of desilter is downstream from the desander in the surface mud system.

All those solids that are not removed by a shale shaker are removed by a desander. Further the smaller size of granules lesser than 20 microns are removed by the desilter. Mud cleaners do not have any moving parts and the removal of sand and silt from the drilling fluid is done by the centrifugal force on the device.

quality replica watchesreplica rolex copy breitling watches copy breitling watches swiss replica breitling swiss replica breitling