Tag Archives: drilling fluid pumps
25 Sets of solid control submersible slurry pump shipped to Singapore
Submersible slurry pump normally used for feeding shale shaker for CBM, HDD. It also can be used as feeding pump for decanter centrifuge. Usually we use single stage and single suction system. The standard length of pump 1 3m, but it can be customized per user demand.
DC Solid control shipped 25 sets submersible slurry pump to Singapore market recent days. Actually, the slurry pump is one kind of centrifugal pump. As slurry pump is mainly transferring liquid and solid mixture, the pump raw material is rather anti-abrasive. It can transfer different hard materials. Including sand, cement, particles, shale, and so on.
Submersible Slurry Pump Features & Benefits
1. The pump shaft under the liquid has enough rigidity. No bearing is set between impeller and pump.
2. Shaft seal is not adapted, the medium with dense solids can also be transported.
3. The Deep Well Water Pump may penetrate the liquid between 800m-2500mm under it, and may be equipped with suction pipes if necessary.
4. Vertical motor is installed on the motor base, connected to the vertical slurry pump by coupling.
Since these submersible slurry pump will be used in Singapore, client has strict requirement to satisfy some standards, especially for our electric motor. We provide CE certification and explosion-proof proof as per their requirement. The model they ordered is our commonly 100YZ100-30 submersible pump with power 22kw. Its lift is 17.5 meter, and rotary speed is 1440r.min. Flow rate is 110m3/h. The length of our pump can be customized according to client’s needs.
DCYZ100-30A Slurry pump shipped to Kazakhstan client
Submersible slurry pump normally used for feeding shale shaker for CBM, HDD. It also can be used as feeding pump for decanter centrifuge. Usually we use single stage and single suction system. The standard length of pump 1 3m, but it can be customized per user demand.
DC Solid control shipped 16 sets Submersible slurry pump to Kazakhstan client who is the second time to purchase our submersible slurry pump. The model of the pump is DCYZ100-30A. Actually, the slurry pump is one kind of centrifugal pump. As slurry pump is mainly transferring liquid and solid mixture, the pump raw material is rather anti-abrasive. It can transfer different hard materials. Including sand, cement, particles, shale, and so on.
The main parameters of the DCYZ100-30A Slurry pump:
Inlet flow: 110m3/h
Working lift: 24m
Speed:1470rpm
Power: 18.5kw
DC’s submersible slurry pump is single stage single suction type pump that is usually used to transfer the slurry with larger solids content. There is no bearing and gland seal between impeller and pump body; hence the slurry pump is maintenance-free and high temperature resistance. Submersible slurry pump is an ideal equipment to transfer the mud to centrifuge and HDD shale shaker. Besides, it can also be used to feed the de-sander and de-silter.
16 Set NEMO MONO Pump Shipped To Russian
NONO pump is an important feeding pump for drilling fluid decanter centrifuge and widely used in Russian Market. At the end of March, DC Delivery 16 sets MEMO MONO pump for Russian clients who is the second time to purchase the pump from our factory.
NETZSCH Progressing Cavity Pumps operate at a constant torque requirement for a specific operating pressure. The speed of the pump does NOT affect the torquerequirement. For example: a pump running at 60psi output pressure at a speed of 200 revolutions per minute requires the same toque input as if it were running at 60psi output pressure at a speed of 600 revolutions per minute. The only exception to this rule is during pump startup; at the moment the pump starts the motor must provide more torque than the pump requires when it is running. This is due to the force of static friction that the motor must overcome in order to begin rotation. Although this is only amomentary force, enough torque has to be available to break the static load.
Additional features
∙High suction capacity – up to 9 mH2O
∙Direction of rotation and flow can be reversed
∙Can be installed in any position
∙Quiet, smooth running
∙Temperatures from – 20 °C to + 200 °C
If you have requirements with all kinds and brand pump please contact us to get cost-effective price quotation.
Drilling mud centrifugal pump China top suplier
As we know, drilling mud centrifugal pump is processing drilling fluid with various solid particle and chemical. It is mainly suspending liquid then the pump impeller and
casing should be more durable and high anticorrosive capability.
How to use centrifugal pump in solid control system
Centrifugal pump is the ideal equipment to provide impetus for Desander, Deserter and Jet mud mixer. It can also be used as Charge Pump auxiliary perfusion for mud pump and
Trip Pump for drilling well head. Centrifugal pump is also called sand pump. We considered completely the set equipment can work in excellent condition in the process of
designing parameters). Most parts can be exchanged , with convenient operation and maintenance、less seal leakage、reliability、long life and other advantages.
Drilling mud centrifugal pump principle
Centrifugal pump is combined with impeller and casing. Drilling fluid will be sucted from impeller side, when impeller rotates at high speed there will be centrifugal force
and gain power or pressure. Then fluid flow through impeller path will produce pressure out. The drilling mud will come out under certain pressure.
Superiority of DC centrifugal pump
DC Offshore’s centrifugal pump designs have proved to be among the best for handling abrasive cements and drilling fluids. They are available in wear-resistant materials
compatible with the diverse applications of the oil and gas industry. DC Offshore’s centrifugal pumps are available from a few gallons per minute to over two thousands five
hundred gallons per minute. When downtime is critical, it is good to know that the DC Offshore’s centrifugal pump is dimensionally interchangeable with most centrifugal mud
pumps in service today.
Drilling Fluid Sand Pump Motor Shipped to Malaysia
SB sand pumps are designed and engineered to handle abrasive, viscous and corrosive drilling fluids or industrial slurry. They have been proved and being in operation on land and offshore drilling rigs around the world. Please contact us for more details in order to make you customized.
Recent days. DC Solid control company shipped more than 20 sets motors matched with drilling fluid sand pumps to Malaysia clients. The drilling fluid sand pump used for offshore drilling site, so it is the explosion-prrof standards.
The Structural Characteristics
Centrifugal sand pump mainly by the pump shell, impeller, pump shaft, wear plate, sealing device, bearing, coupling, motor, base and other components. The series of centrifugal sand pump is characterized as
1. Open impeller, suitable for conveying high viscosity drilling fluid;
2. Combination of sealed, long service life;
3. All models of centrifugal pump bearing, shaft and other parts common, easy maintenance, cost savings;
4. The main parts are wear-resistant ductile iron, resin sand precision casting, long life, good looks.
Centrifugal pump works by centrifugal movement of water caused by impeller rotation. Before starting, the pump shell and suction pipe must be filled with water, and then the motor is started, so that the pump shaft drives the impeller and water to rotate at high speed, water centrifugal movement occurs, which is thrown to the outer edge of the impeller and flows into the pump’s pressure pipeline through the flow channel of the volute pump shell.
If you have any problems or questions about our products or need our support and assistance, please write to us, we will reply to you within 24 hours, and we will use security measures for your information and never reveal your information to the third party. If you become our customer, you will get corresponding discount.
Centrifugal pump/feeding Pump China factory
Usually, oilfield centrifugal pump is a machine which converts mechanical energy into the kinetic energy of oilfield centrifugal pumped fluid for the purpose of transporting that fluid from one point to another.
But in order to be classified as a centrifugal pump, oilfield centrifugal pump needs to have two unique components: the first is a rotating disc with curved blade like vanes on it called an impeller, and the second is a specially shaped pipe called a volute casing which contains the impeller and the pumped fluid.
We have many model of the drilling fluid sand pump, the commonly used are SBSB8x6-14, SB6x5-12, SB5x4-12, SB4x3-12 and ect. Usually users selects the centrifugal pump is according to flow rate demand. Furthermore, the flow rate is related with motor power, head, electric system, the impeller size. Centrifugal pump in drilling mud process system is mainly power supply. And pump drilling fluid from mud tank to mud process equipment. Such as desander, desilter, or mud cleaner cones, decanter centrifuge.
Besides, the pump working condition is rather hard by transferring drilling fluids with solid in for a long term. We need the bearing seal to be very reliable and steady. If you have request of any sand pump, please freely to contact DC Machinery.
The SB series centrifugal pump for solid control system
SB series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipment work efficiently.
SB Series Centrifugal pump is used for transferring slurry or mud or water. It can be used as feeding pump for desander, desilter, or used as mixing pump for Jet Mud Mixer. Also it can be used as trip pump, and supercharging pump for rig mud pump.
All DC model centrifugal pump use tungsten carbide mechanical seal, with famous brand Bearing. And spare parts interchangeable with most of the international Brand pump which helps customer to source spare parts easily. Open impeller design that lowers axial thrust loads, and make it easier for installation, repair and maintenance.
DC Centrifugal pump has been exported to many overseas countries. The reliable quality and cost effective solutions has helped GN Solids Control to win many orders of centrifugal pump from the world. With our branches and partners around the world.
Screw pump to be as the feeding pump for centrifuge delivery
DC screw pump can be working for feeding decanter centrifuge. And can also feeding clean water for flushing use. DC is a hydraulic screw pump manufacturer and can supply screw pump according by customs’ requirement.
The screw pump is an ideal mud pump to feed drilling fluids for decanter centrifuge since the fluids may flow along with the shaft with a very slow inner flow speed, which will not change the pump’s capacity, but will keep the pressure steady so that no vertex or agitation will be produced. Besides, the screw pump can also be used in the drilling waste management for wet mud and cutting transportation.
The screw pump is of compact structure, small volume, easy maintenance. Rotor and stator are wear parts of this pump, which are convenient to replace.
If you want know more about feeding pump, please contact DC office.
Horizontal sand pump using effect
Horizontal sand pump is an important equipment in oil rig mud cycling system. Sand pump is a kind of centrifugal pump .DC produce the pump with reliability 、 heat-resistant 、large flow 、long life 、low- energy consumption 、easy maintenance and other advantages.
Structure of horizontal sand pump
The horizontal sand pump adopts the axial suction structure, horizontal or vertical structure, composed of a motor, a pump seat, a pump shell, an impeller etc., using shear coupling (horizontal pump) or plum coupling (vertical) connection, mechanical or combined sealing structure, the main vice impeller combination.
Working principle of sand pump
After the centrifugal pump started, the pump shaft drive impeller together to do high speed rotation, forced beforehand filling between the blades liquid rotation, under the function of inertia centrifugal, liquid does a radial motion from the impeller center to peripheral. Liquid won energy in the process of flow to impeller movement, static pressure energy increases, velocity increased. After liquid depart from impeller to enter into pump casing.
Centrifugal pump for drilling fluids solids control
An oilfield solids control system needs many centrifugal pumps to sit on mud tanks. The pumps are generally used to transfer drilling mud to make it circulate through tank system. According to mud feeding and drilling flow locations we name the centrifugal pump as feeding pump for desander / desilter or mud cleaner, mixing pump for jet mud mixer, trip pump for trip tank and supercharging pump for rig mud pump.
Submersible slurry pump seller
A submersible slurry pump is a device which has a hermetically sealed motor closely coupled to the pump body. The whole assembly is submerged in the fluid to be pumped.
Slurry Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi- shrouded with the agitating vane on the vane extended.
The submersible pumps operates in a vertical position. Although their constructional and operational features underwent a continuous evolution over the years, their basic operational principle remained the same. Produced liquids, after being subjected to great centrifugal forces caused by the high rotational speed of the impeller, lose their kinetic energy in the diffuser where a conversion of kinetic to pressure energy takes place. This is the main operational mechanism of radial and mixed flow pumps.
The pump shaft is connected to the liquid/gas separator or the protector by a mechanical coupling at the bottom of the pump. Well fluids enters the pump through an intake screen and is lifted by the pumps. Other parts include the radial bearings ( bushings ) distributed along the length of the shaft providing radial support to the pump shaft turning at a high rotational speed.