replica rolex Umbrella coverage to prolong your liability. fake watches fake watches Some actions you'll be able to choose to save lots of with your 2nd household insurance policy. Set up an alarm technique, in the event you can, also get 1 that detects fireplace or strength failure. Set up a fence. Trying to keep factors away from the property while in the very first area is usually an excellent protection. Is your property in the gated group replica breitling replica breitling ? replica cartier replica cartier replica cartier watches replica cartier watches This can be excellent for an insurance policy lower price. Would be the 2nd residence a condominium? Condos have their particular distinctive issues replica watch replica watch . One example is the affiliation typically carries insurance policy to deal with the constructing but most periods won't protect your contents. Holiday properties are only that, family vacation properties, meaning that for a long time for the duration of the entire year replica rolexfake omega

Tag Archives: oilfield mud cleaners

Best Quality Mud Cleaners China Manufacturer

Mud cleaner is the second stage solid control equipment used for drilling fluid circulation system, HDD, CBM and Geothermal environmental waste mud cleaning system.

Normally, there are two stages separation process for this item to recovery the mud. While in actual use field, we always combine a group of hydro-cyclones mounted over a shale shaker to operate as a single unit, which we call it as Mud Cleaner.

Mud cleaner1

Working Process Flow of Mud Cleaner

The weighted mud flows to the inlet head section of the desander and/or desilter entering the hydrocyclones for separation of particles. Mud leaving the underflow is further screened with fine mesh to separate larger particles allowing only barite-size particles to pass through the screen.

 

Advantages Of Mud Cleaner:mud cleaners

1. High Performance
Processing capacity of 1,000 gpm with the 2-12 desander and 900 gpm with the desilter concentrates solids onto a classification shaker.
2. Reduces Operating Cost
The mud cleaner reduces sand and silt-size particles and saves liquid, thus reducing mud cost, chances of stuck pipe and lost circulation and improving rate of penetration.
3. Reduces Disposal Cost

The mud cleaner minimizes waste generated thus reducing disposal cost.

As a domestic solid control supplier. DC Solid control also design, manufacture all types of mud cleaner according to users requirements, such as linear motion type,dual motion type, double deck mud cleaner and ect. Welcome to your ponderable inquiry.

Mud cleaner used for drilling fluid mud recycling system

Mud cleaner is the second class in the drilling fluid system, separate the drilling fluid which is disposed by the first class. Mud cleaner is made of a group of hydrocyclone, a shale shaker and the shunted tubes.

cleaners

The upper is a group of hydrocyclone, the under part is a detail shale shaker. The process of the mud cleaner disposed the drilling fluid divided into two steps. The first step; the drilling fluid is separated into the over flow and the bottom flow with the different density, the over flow return the drilling fluid circulating system, the bottom flow drop on the detail shale shaker. The second step; the high density bottom flow is divided into two parts by the detail shale shaker, one part is the barites and the particles which is less than the mesh through the screen, the other part is the particles which is bigger than the mesh is eliminated by the screen, usually the screen is between 100mesh and 325 mesh, the 150 mesh is widely used.

mud cleaner

Advantages of Mud cleaners:
1. It is a necessary equipment of deep well and super deep well disposed the aggravation of drilling fluid, it can remove the super fine solid phase in aggravation of fluid.
2. It can effectively control the content of aggravation of drilling fluid, to prevent the pressure difference the post card, adhesion the post card and other accidents, reduce the bond issues of drilling string and the thickness.
3. Save the drilling cost.
4. Improved the drilling environment

Compared with the Deserter and the Desander, the mud cleaner have the characteristics of the throughput is big, out faster, the structure is compact and it is easy to operate and maintain, Integrated the advantages of the hydrocyclone and shale shaker, it can quickly remove the harmful solid phase in the drilling fluid, improve the performance of the drilling fluid , meet the requirements of the new process of the high pressure jet drilling.

 

 

Double Deck Mud cleaner From China Manufacturer

As is known to all, for Mud Cleaning System treatment, there is single deck shaker and double deck shaker. Considering the fact field application of Mud Cleaning System is combination of cyclones and shale shaker. Recent days, DC has a double deck mud cleaner was salable for domestic and abroad.

mud cleaner

In some cases such compact footprint can save location around the mud cleaner and save cash for the operator. We have many design models of double deck mud cleaners it depends upon the treating capacity you necessary as well as your budget.

Double deck mud cleaner DCQJ may play a role as desander, desilter and double steps of shale shaker. The low deck screen is first separation part of mud cleaner with comparable coarse screens as the upper deck is finer like a drying shale shaker for that desander and desilter cones.

shale shakers

We make use of the dual function double deck shale shaker within the compact style bored piles desander unit, and make a mud cleaner, shale shaker, hydrocyclones, centrifugal pumo, mud hopper in a single skid. It may be utilized for HDD, bored piles desander unit, water well drilling, trenchless,and so on projects.

For more facts, pls make contact with China DC Solid control.

Application and structure of Mud cleaners

Mud cleaners are two-stage solids control equipment that are composed of several hydrocyclones mounted over a vibrating screen, known as a shale shaker. Mud cleaners are used to remove solids from drilling fluid and act as 2nd and 3rd phase solids control equipment.

SONY DSC

This model Mud Cleaner combines 10” desander hydrocyclone(s) with smaller 4” hydrocyclones, effectively taking two “cuts” at the unwanted solids contaminating the fluid. The 10” remove large solids down to approximately 100 microns and the 4” can remove solids down to the 20 micron size range. The vibratory screening unit is designed to take the underflow of both size sets of hydrocylones and separate the concentrated solids from the liquid.

mud cleaners

The Mud Cleaner  requires two pumps to operate, with the pump feeding the 10” cyclones typically taking a suction from a compartment upstream from the compartment from which the other pump takes its suction to feed the 4” hydrocyclones.

The Mud Cleaner will be designed to handle the entire circulating volume of whichever system in which it is operating. Mud Cleaners are effective on both weighted and un-weighted drilling-fluid systems in removing and drying solids while retaining the expensive liquid phase. Used correctly, the Mud Cleaner can lower both drilling fluid and disposal costs.

 

Drilling mud shale shaker and mud cleaner introduction

Shale shaker and mud cleaner is an very important equipment for mud circulation system. The working efficient is directly effect the whole drilling working. So as a operator must choose the right and reasonable shale shaker and mud cleaner.

mud cleaner

Shale shaker is the first line stage equipment of solid control system. DC shale shaker absorbed advanced tech at home and abroad ,and integrated DC own design. DC complete series shale shaker can meet customers’ variable demand. Clients feedback proved the advantages of this kind of shale shaker: high G-force, wide screen area, compressed structure, cost-effective, etc.

shale shakers

Mud cleaner is a combination of desander, desilter and dewatering shale shaker. It is a compact design, small footprint, three in one unit widely accepted by nowadays drilling contractors. It is often installed after the shale shakers where the sand trap drilling mud feeds into the desanders and desiters respectively, the underflow of hydrocyclones loads onto the dewatering screens for recycling the usefully drilling fluids back to the mud system. The drilled cuttings above the screens are therefore dried which lowers drilling cuttings disposal cost.

Please contact DC solid control to get more information of shale shaker and mud cleaners. We can manufacturer all kinds of shale shaker, and mud cleaners.

The mud cleaner is designed to remove the drill cuttings

Mud cleaner is consisted of shale shaker,desander and desilter for oil&gas well drilling fluids treatment system. More importantly,mud cleaner works more effectively,especially in cleaning functions compared with separated desander and desilter.Sometimes,it can be used as a shale shaker.

cleaners

Mud cleaners are used to remove drill cuttings from drilling fluid, known as mud. The mud is a non-Newtonian fluid of variable viscosity that serves several purposes in drilling operations. Mud is used to drive the down-hole motor, cool the drilling bit, carry the drill cutting to the surface for disposal, and maintain hydrostatic balance in the well.

mud cleaner

The mud cleaner is designed to remove the drill cuttings while allowing the weighted fillers of the mud, commonly barite, to stay suspended in the mud. The cuttings, consisting of solids greater than 74 to 105 micrometers, are filtered out in the staged process of the mud cleaner.

According to the customers’requirements, DC SOLID CONTROL company can design the mud cleaner which can meet almost all needs.

DC Mud cleaners combination and functions

Mud cleaner combines a hydrocyclone system (desander cone and desilter cone) with a shale shaker to help remove the fine drilled solids from the drilling fluid. It consists of a two-stage separation process that using a combination of hydrocyclones mounted over a shale shaker to operate as a single unit.

Desander with 10 inch cones,or 8 inch cones,or 12 inch cones act as the second phase drilling mud cleaning equipment.We have customized number cones desander for clients. Desilter with 4 inch cones,or 5 inch cones,act as the third phase mud cleaning equipment.Which clean out particles 15-45 microns.

mud cleaner

DC solids control desilter unit features the reliable polyurethane desilter cones with a unique 20o taper angle (compare to the 15o taper angle on most other unit.) The twin-cone design provides a 50% greater capacity than other 4 inche (102mm) cones.

Anyhow, a customized quantity cone would be provided as per customer special request. DC mud cleaner can meet almost all needs for oil & gas well drilling fluids treatment system and HDD Mud Recycling System.

3 Sets mud cleaners shipped to Port and used for HDD project

Mud cleaners are the second phase of solid control equipment in solid control system which is combination of desander, desilter and bottom shale shakers. Last week, DC solid control shipped 3 sets mud cleaners to India HDD project company.

drilling fluid shale shakers

Features of our mud cleaners such as our wedge-lock fastening system, mud bypass gate, and explosion proof enclosures all allow for ease of use. Our pride is truly expressed in our work through our craftsmanship, research, design, and the overall practicality of our equipment.

shale shakers

With our in-house engineering and design capabilities, DC Solid control can integrate any number of hydrocyclone arrangements with any of our shakers. In all cases, DC Mud cleaners’s hydrocyclones come with polyurethane bodies, where erosion resistant inserts are available. Standard hydrocyclone cone sizes available include 4”, 5”, 10”, and 12” and can be provided in arrangements of one to 20 cones.

Please always do operation and maintenance work by qualified person. Thus we’ll let all equipment run at best level and create most value for

Development of mud cleaners of mud circulation system

Mud cleaner is the second stage equipment of drilling fluid circulation system. Mud cleaner is the combination of desander, desiter cones and and very fine mesh vibrating screens (120-400 mesh) to remove fine drilled solids while returning valuable mud additives and liquids back to the active mud system.

DSC00245

Mud cleaners were developed in the early 1970s to remove fine drilled solids from weighted mud without excessive loss of barite and fluid. They have also proved valuable tools in closed systems and other dry location applications.

DSC00247

Traditional mud cleaners use multiple 4 or 5 cyclones, mounted over a vibrating screen, and are able to effectively process 400-600 GPM. The process capacity is limited by screen capacity and its ability to discard dry solids.

With the introduction of linear motion vibrating screens, the capacity of the mud cleaner screen has been greatly increased. This, in turn, allows the use of additional hydrocyclones and higher, overall process capabilities. Please contact me to get more info about the mud cleaners

DCQJ Series oilfield mud cleaner shipped to abroad

DCQJ mud cleaners and are available in different configurations to meet customer requirements. 2-panel, 3-panel or 4-panel shakers are available with desanders and and/or high-volume desilters. Our new hydrocyclones technology replaces the conventional desanders and desilters cones with significant benefits.

solid control system1

Yestersay, DC Solid control company shipped 3 set mud cleaner to the abroad clients used for oilfield. This model Mud Cleaner combines 10” desander hydrocyclone(s) with smaller 4” hydrocyclones, effectively taking two “cuts”at the unwanted solids contaminating the fluid. The 10” remove large solids down to approximately 100 microns and the 4” can remove solids down to the 20 micron size range.

The vibratory screening unit is designed to take the underflow of both size sets of hydrocylones and separate the concentrated solids from the liquid. The Mud Cleaner requires two pumps to operate, with the pump feeding the 10” cyclones typically taking a suction from a compartment upstream from the compartment fromwhich the other pump takes its suction to feed the 4” hydrocyclones.

The Mud Cleaner will be designed to handle the entire circulating volume of whichever system in which it is operating. Mud Cleaners are effective on both weighted and un-weighted drilling-fluid systems in removing and drying solids while retaining the expensive liquid phase. Used correctly, the Mud Cleaner can lower both drilling fluid and disposal costs.

quality replica watchesreplica rolex copy breitling watches copy breitling watches swiss replica breitling swiss replica breitling